Insulation Fixings

Display: List / Grid
EJOT Spiral Anchor

Fastening solution for light fixtures onto Rendered or Plastered insulation system for all substrates.

£3.35
Inc Vat: £4.02
Extra long P2 countersunk screws
Extra Long P2 countersunk screws for fixing external insulation board with thin 4.8mm shank to pass through insulated washer.  For timber studs and rafters. Up to 300mm length. Philips P2 head. Galvanised. Select screw size 40mm longer than thickness of insulation. Allow at least 8 per m². Use to anchor Isolair / Pavatherm-Plus / Pavatherm-Combi boards into Timber stud/truss/rafter/metal. ..
Starting at £4.21
Inc Vat: £5.05
Insulation fixing FID
To fix lightweight fixtures in plastered and non-plastered insulating boards. 50 or 90mm length. The fischer FID can be set either by hand, or with a cordless screwdriver. The special spiral thread taps itself in the insulating board. ..
Starting at £19.32
Inc Vat: £23.18
EWI/IWI Universal Insulation Anchors
Universal hammer-in anchor • Approved for concrete, solid and perforated masonry • Solid steel nail (break-proof) • Plastic injection moulding to reduce thermal transmission • Can be used with an additional spreader washer • Short embedment depths, reduced drilling • High loads for your security • Economic anchor usage • Allow 8 fixings per sq. metre • Premounted nail for quick installati..
Starting at £54.36
Inc Vat: £65.23
EWI/IWI Heavy Duty Insulation Anchors
Universal screw-in anchor for countersunk and surface fixed installation • Approved for all building materials • Countersunk installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust • Surface fixed installation using ejotherm STR plug • Short embedment depths, high loads for maximum safety and economic anchor usag..
Starting at £161.79
Inc Vat: £194.15
EWI/IWI Insulation Anchor for Timber Frame
Screw fastener for countersunk and surface fixed installation for timber and some steel substrates • For timber and steel (max 0.75 mm) substrates • Countersunk installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust • No drilling necessary • Allow 8 fixings per sq. metre • Surface fixed installation using e..
Starting at £18.82
Inc Vat: £22.58
Insulated fixing washer
Plastic washer (formerly KC fixing washers) for use when fixing wood fibre insulation board to timber backgrounds as part of an insulated system. A 6mm flange head screw, sufficiently long to give 25mm fixing in studs should be used.  Sold in packs of 100 (screws not supplied). Note, that this product is not suitable for fixing our wood wool thermal board product and may require pre-drilli..
£18.64
Inc Vat: £22.37
Plastic Dome Washer 40 x 6mm (200 per box)
Plastic washer for use when fixing wood wool Thermal Board when not being used as part of an insulated system. A 5mm screw, sufficiently long to give 35mm fixing in studs should be used.  Sold in packs of 200 (screw not supplied). When fixing wood wool board allow 8 fixings per m² and use a stainless steel screw if finishing with lime plaster. ..
£14.99
Inc Vat: £17.99
Plastic Dome Washer 60 x 5mm (100 per box)
Plastic washer for use when fixing wood wool Thermal Board when not being used as part of an insulated system. A 5mm screw, sufficiently long to give 35mm fixing in studs should be used.  Sold in packs of 100 (screw not supplied). When fixing wood wool board allow 8 fixings per m² and use a stainless steel screw if finishing with lime plaster. ..
£13.18
Inc Vat: £15.82
WARMSHELL EWI/IWI System Fixings
Universal hammer-in anchor • Approved for concrete, solid and perforated masonry • Solid steel nail (break-proof) • Plastic injection moulding to reduce thermal transmission • Can be used with an additional spreader washer • Short embedment depths, reduced drilling • High loads for your security • Economic anchor usage • Premounted nail for quick installation Allow 6-8 fixings per m² ..
Starting at £52.79 £54.36
Inc Vat: £65.23
#

If you have special requirements or cannot find the answer to your question on our website, do...

CONTACT US



The Passivhaus Store is wholly owned by
Passivhaus Homes Ltd.,
company no. 0657 9620

#

Need information?

Please visit our Help, Advice & Downloads page.



PLEASE NOTE:
Passivhaus Homes are not responsible for the 

accuracy of any third party content.

#

 CALCULATE DELIVERY COSTS


Passivhaus Store mostly ships direct from supplier to you to minimise transport, reduce lead-in time and avoid costly double handling of goods. If your order contains products despatched from more than one source, our delivery cost calculator will add up each delivery charge to give you a total delivery cost. Note that our policy is simply to pass on the cost of delivery to you, not to use delivery charges to make hidden profits.


Read more about delivery here

Copyright 2014 Passivhaus Homes Ltd