Fakro EHV-AT Thermo Flashing
The EHV-AT Thermo is a flashing that can be used with most* types of roof coverings up to 90mm profile depth. It is applied as standard to individual windows in the slope of the roof. The flashing may also be used as module flashing for windows used in horizontal and vertical combinations or block groups.
EHV-AT Thermo is available for installation of windows at a depth V (0cm), on roofs with pitches between 15° and 90°.
The flashing is 22mm wider than standard and is made of four basic elements (bottom element, two sides elements and top element), each profiled with insulation material. In the set, are included proper width side covering profiles. The lower element has a long, wide aluminium plastic apron with an adhesive PVC fillet adhered to the underside. This allows the flashing to be adhered to the roof covering for a perfect fit. The flashing is equipped with side sealing channels to protect against wind blown dust, leaves, rain and snow. Also in the set there is a weep flap to allow condensation to drain away from the window.
* For slate roofs, use ELV-AT Thermo flashing
1 - FTT U8 Frame, 2 - EHV-AT Thermo flashing, 3 - XDP Insulation set (sold seperately)
For slate roofs use the ELV-AT Thermo flashing
- Brand: Fakro